Zsfm Deluge Valve
The core advantages of Zsfm Deluge Valve revolve around the efficiency of open fire protection systems, scene flexibility, and adaptability to special environments. Compared with closed system valves such as wet alarm valves and dry alarm valves, it performs more outstandingly in quickly controlling fires, large-scale fire extinguishing, and complex working conditions.
Description
Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of zsfm deluge valve in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.
Products Description

CA-FIRE Zsfm Deluge Valve
The core advantages of Zsfm Deluge Valve revolve around the efficiency of open fire protection systems, scene flexibility, and adaptability to special environments. Compared with closed system valves such as wet alarm valves and dry alarm valves, it performs more outstandingly in quickly controlling fires, large-scale fire extinguishing, and complex working conditions.
| Model | Nominal Diameter (DN) | Height (mm) | Working Pressure | Seal Test | Strength Test | Hydraulic Loss |
|---|---|---|---|---|---|---|
| ZSFM 50-350 | DN50 / DN65 / DN80 / DN100 / DN125 / DN150 / DN200 / DN250 / DN300 / DN350 | 270 / 270 / 330 / 340 / 415 / 415 / 530 / 650 / 770 / 850 | 1.6 MPa | 3.2 MPa | 6.4 MPa | <0.08 MPa |
| Grooved ZSFM 80-200 (G) | DN80 / DN100 / DN150 / DN200 | 330 / 360 / 425 / 530 | 1.6 MPa | 3.2 MPa | 6.4 MPa | <0.08 MPa |
Fire extinguishing efficiency: Instantaneous start-up, extensive coverage
Our advantage

No-delay water spraying
The rain shower valve is usually in a closed state, with no water in the pipeline (or only low-pressure water is present). Once triggered (such as by detector linkage or manual control), the valve will open instantly, and all open sprinkler heads connected to it will spray water simultaneously, creating a "rain shower" coverage. The wet valve relies on the rupture of the sprinkler head's glass ball to activate one by one, while the dry valve needs to first evacuate the gas from the pipeline, both of which have a 10-30 second delay, resulting in lower fire suppression efficiency for rapid spreading fires (such as oil or electrical fires).

Massive flow impact
The valve body of the rain suppression valve is designed to fit large-diameter pipelines (commonly DN80-DN200). It can achieve a flow rate far exceeding that of wet-type valves (for some models, the single valve flow rate can reach over 1000L/min). This enables the generation of high-intensity water flow or water mist, which can quickly suppress high-heat value fires (such as oil tank fires or chemical plant fires), and even directly cut off the path of flame propagation.
Applications & Working Principle
Applications:
The design of the rain valve can overcome the limitations of closed systems and be suitable for various complex or high-risk scenarios. This is an advantage that other valves cannot match. .
No malfunctions in low-temperature/high-temperature environments:
The wet valve may crack due to water freezing in the pipeline when the temperature is below 0℃, and an additional heating device needs to be installed. Although the dry valve has no water, the sealing parts may harden at low temperatures and the gas flow resistance may increase, which may cause a delay in startup.
The rain valve water supply network is dry (open system) in normal times, with only pressurized water at the valve inlet. There is no need to worry about freezing and cracking. At the same time, the valve body is mostly made of heat-resistant and low-temperature-resistant ductile iron or stainless steel, which can work stably in an environment ranging from -20℃ to 80℃. It is suitable for northern factories, high-temperature workshops, and other scenarios.
Compatible with various fire extinguishing media and methods:
In addition to water, the rain valve is compatible with various fire-extinguishing media such as foam mixture and anti-soluble foam. By interacting with the foam generator, it forms a foam layer, specifically designed to deal with liquid fires such as oils and alcohols (the wet valve can only use water and has limited effectiveness against liquid fires).
It can be combined with different types of open sprinkler heads (such as water mist sprinklers, water curtain sprinklers), achieving multiple functions such as "fire extinguishing", "cooling protection" and "fire separation", for example, setting a deluge water curtain in the fire separation zone of a factory to prevent the fire from spreading across areas.


FAQ
Q1: What is the main difference between a grooved deluge valve and a flanged deluge valve?
A1: The primary difference lies in the connection type. Grooved deluge valves use grooved-end pipe connections, which allow for faster installation with mechanical couplings and easier maintenance. Flanged deluge valves, on the other hand, use flanged connections that require bolting, offering a more traditional and rigid piping system.
Q2: Are grooved deluge valves suitable for the same applications as flanged valves?
A2: Yes, both types can be used in fire protection systems, including sprinkler and deluge systems. However, grooved valves are often preferred in systems where installation speed, flexibility, or space constraints are considerations.
Our address
NO.8, YUANFENG ROAD, MEIYUAN VILLAGE, KANGMEI TOWN, NANAN CITY, QUANZHOU CITY, FUJIAN CHINA
+86 15880910562
sales7@ca-fire.com

Hot Tags: zsfm deluge valve, China zsfm deluge valve manufacturers, suppliers, factory, Deluge Valve Alarm Check Valve, Deluge Valves, Automatic Deluge Valve Sprinkler System
Send Inquiry
You Might Also Like










