QT-PC/PCL Series Ductile Iron Low-expansion Foam Generator
The QT-PC/PCL series ductile iron low-expansion foam generator is a core foaming equipment dedicated to large flammable liquid tank farms, available in two types: tank-top hoist-mounted (PCL series) and pipeline in-line (PC series). Its main body is manufactured via vacuum full-mold precision casting of QT450-10 ductile iron, with a heavy anti-corrosion process of "double-layer zinc-aluminum pseudo-alloy primer + fluorocarbon topcoat" — achieving salt spray resistance ≥ 1000h. Compatible with a working pressure range of 0.3-0.6MPa, it converts foam mixture into uniform low-expansion foam with an expansion ratio ≥ 5, addressing core needs of "large-flow foaming in tank farms + long-term outdoor corrosion resistance". It is suitable for scenarios such as ultra-large crude oil storage tanks, light hydrocarbon storage areas, and chemical raw material tank clusters, complying with GB 15308-2006 and API RP 11 foam fire suppression standards.
Description
Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of qt-pc/pcl series ductile iron low-expansion foam generator in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.
Products Description

QT-PC/PCL series ductile iron low-expansion foam generator
The QT-PC/PCL series ductile iron low-expansion foam generator is a core foaming equipment dedicated to large flammable liquid tank farms, available in two types: tank-top hoist-mounted (PCL series) and pipeline in-line (PC series). Its main body is manufactured via vacuum full-mold precision casting of QT450-10 ductile iron, with a heavy anti-corrosion process of "double-layer zinc-aluminum pseudo-alloy primer + fluorocarbon topcoat" - achieving salt spray resistance ≥ 1000h. Compatible with a working pressure range of 0.3-0.6MPa, it converts foam mixture into uniform low-expansion foam with an expansion ratio ≥ 5, addressing core needs of "large-flow foaming in tank farms + long-term outdoor corrosion resistance". It is suitable for scenarios such as ultra-large crude oil storage tanks, light hydrocarbon storage areas, and chemical raw material tank clusters, complying with GB 15308-2006 and API RP 11 foam fire suppression standards.
Applications & Working Principle
| Model | Structure Type | Rated Mixture Flow Rate (L/s) | Working Pressure Range (MPa) | Flow Series (K) | Water Inlet Spec | Water Outlet Spec | Installation Reference Height (mm) | Foam Expansion Ratio | Housing Wall Thickness (mm) | Compatible Foam Concentrate Types |
|---|---|---|---|---|---|---|---|---|---|---|
| PCL4-QT | Tank-Top Hoist-Mounted | 4 | 0.3-0.6 | 107 | DN50 (1.6MPa) | DN65 (0.6MPa) | 320 | ≥5 | 8 | AFFF/Protein Foam Concentrate |
| PCL8-QT | Tank-Top Hoist-Mounted | 8 | 0.3-0.6 | 215 | DN65 (1.6MPa) | DN80 (0.6MPa) | 350 | ≥5 | 10 | AFFF/Alcohol-Resistant Foam Concentrate |
| PCL16-QT | Tank-Top Hoist-Mounted | 16 | 0.3-0.6 | 429 | DN100 (1.6MPa) | DN125 (0.6MPa) | 395 | ≥5 | 12 | AFFF/High-Expansion Foam Concentrate |
| PCL24-QT | Tank-Top Hoist-Mounted | 24 | 0.3-0.6 | 644 | DN125 (1.6MPa) | DN150 (0.6MPa) | 420 | ≥5 | 14 | AFFF/Alcohol-Resistant Fluoroprotein Foam |
| PC4-QT | Pipeline In-Line | 4 | 0.3-0.6 | 107 | R2 | DN65 | 220 | ≥5 | 8 | Protein/Alcohol-Resistant Foam |
| PC8-QT | Pipeline In-Line | 8 | 0.3-0.6 | 215 | R2 1/2 | DN80 | 225 | ≥5 | 10 | AFFF/Protein Foam Concentrate |
| PC16-QT | Pipeline In-Line | 16 | 0.3-0.6 | 429 | R3 | DN125 | 230 | ≥5 | 12 | Alcohol-Resistant Fluoroprotein Foam |
| PC24-QT | Pipeline In-Line | 24 | 0.3-0.6 | 644 | R4 | DN150 | 240 | ≥5 | 14 | AFFF/High-Expansion Foam |


Structural & Material Advantages

1 Ductile Iron Process Advantages
Manufactured via vacuum full-mold casting of QT450-10 ductile iron (graphite spheroidization rate ≥ 92%), after low-temperature aging treatment:
Tensile strength ≥ 450MPa, 50% higher deformation resistance than gray cast iron;
Low-temperature impact toughness ≥ 12J/cm² at -20℃, suitable for low-temperature winter environments in northern tank farms;
The UV aging resistance of the fluorocarbon topcoat is 60% higher than polyurethane coatings, with an outdoor service life ≥ 12 years.
2 Scenario-Oriented Structural Design
Tank-Top Hoist-Mounted (PCL Series): Built-in wind-load resistant deflector, capable of withstanding 8-level gusts in tank farms to prevent foam dispersion; the hoist base features horizontal calibration scales, with installation deviation ≤ ±2° to ensure precise foam coverage of the tank surface;
Pipeline In-Line (PC Series): The water inlet adopts a tapered flow channel design, improving mixture flow stability by 30% and avoiding uneven foaming caused by pipeline turbulence; the housing has a quick-access inspection port, allowing internal filter cleaning without dismounting the pipeline;
Installation & Maintenance Specifications
5.1 Installation Key Points
Tank-Top Hoist-Mounted (PCL): The hoist point must align with the tank-top load-bearing beam; after installation, use a level to calibrate the foam outlet downward angle (recommended 5°) to prevent foam splashing outside the tank;
Pipeline In-Line (PC): In-line with the foam mixture pipeline branch; a straight pipe section ≥ 5 times the pipe diameter must be reserved at the water inlet to ensure stable mixture flow;
Oil-resistant graphite composite gaskets are used for interface sealing; bolt pre-tightening torque is graded by DN spec (120N·m for DN100); a 0.6MPa pressure holding test (10min) must be conducted after installation to check for leaks.
5.2 Hierarchical Maintenance Strategy
| Maintenance Level | Cycle | Core Operations |
|---|---|---|
| Daily Inspection | Monthly | Inspect housing coating integrity; clean debris around the foam outlet |
| Quarterly Maintenance | Every 3 months | Remove the filter to clean impurities; test water inlet sealing performance |
| Semi-Annual Testing | Every 6 months | Connect to foam mixture; inspect foaming uniformity (foam pore size deviation ≤ ±1mm) |
| Annual Calibration | Annually | Entrust a third party to test low-temperature impact toughness; replace aged seals |
| Winter Protection | Before temps < -5℃ | Wrap tank-top units with silicone rubber insulation sleeves to avoid housing damage from residual liquid freezing expansion |
FAQ
Q: What is Foreign Trade-Express?
A: Foreign Trade Express is a one-stop intelligent foreign trade network marketing SaaS system platform.
Q: Can you accept OEM?
A: Yes, we do customized design for our clients.
Q: Are you manufacturer with your own factory?
A: Yes, we are the manufacturer for more than 20 years,our factory produce the fire sprinkler and fire foam products,welcome to visit anytime.
Q: Can I visit Slion factory ? Can your factory arrange transportation to us ?
A: Yes,It's great honner to invite you to visit Slion .We can pick you up from wenling station.It's about 50 minutes from station to our factory.
Q: Which areas do you export ?
A: Europe,USA,North america,South America,Middle east,Asia and Africa.
Our address
NO.8, YUANFENG ROAD, MEIYUAN VILLAGE, KANGMEI TOWN, NANAN CITY, QUANZHOU CITY, FUJIAN CHINA
+86 15880910562
sales7@ca-fire.com

Hot Tags: qt-pc/pcl series ductile iron low-expansion foam generator, China qt-pc/pcl series ductile iron low-expansion foam generator manufacturers, suppliers, factory, Air Foam Chamber, Low Expansion Foam Chamber, Foam System Firefighting Foam Chamber, Foam Chamber
Send Inquiry
You Might Also Like











