Alarm Check Valve Reliable
Wet alarm check valve reliable for wet sprinkler systems can be installed vertically or horizontally in non-frozen areas and are used to protect building property and personnel under a reliable pressure water source. When the system flows into a stable flow equivalent to one or more nozzles, the pressure switch or hydraulic alarm device can be automatically activated.
Description
Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of alarm check valve reliable in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.
Alarm Check Valve Reliable
Wet alarm check valve reliable for wet sprinkler systems can be installed vertically or horizontally in non-frozen areas and are used to protect building property and personnel under a reliable pressure water source. When the system flows into a stable flow equivalent to one or more nozzles, the pressure switch or hydraulic alarm device can be automatically activated.
Technical Parameters
Connection mode: flange type (1.6 level), groove type
Body material: ductile iron or stainless steel
Disc, seat, delay material: ductile iron or stainless steel
Seal material: nitrile rubber, oil resistance, pressure resistance, temperature resistance, aging resistance, use resistance.
Appearance: Spray high temperature baking, bright appearance, full coating, bright wear resistance, corrosion resistance.
Design requirements:
1. The discharge of a large amount of water generated by hydraulic tests must be considered.
2. When installing the valve upright, the water flow direction should be upward. When the valve is installed horizontally, the direction of the drain pipe should be downward.
3, the system design and installation must pay attention to whether the structure of the system pipeline will produce air bags in the pipeline, the large number of gas in the air bag may cause intermittent alarm when the system is operating.
4. Test valve at the top of the water distribution pipe or the end of the water distribution branch pipe at the most remote point of the alarm valve. When water is injected into the system, open the end water testing valve and slowly fill the system with water to avoid a large amount of gas in the system pipeline.
5. The alarm valve group should be installed in an obvious position for easy operation, and the height from the indoor ground should be 1.2m; The distance between the two sides and the wall should not be less than 0.5m; The distance between the front and the wall should not be less than 1.2m.
Hot Tags: alarm check valve reliable, China alarm check valve reliable manufacturers, suppliers, factory
Send Inquiry
You Might Also Like








