Home - Products - Fire Sprinklers - Details
Sprinkler Dry
video
Sprinkler Dry

Sprinkler Dry

sprinkler dry is engineered for cold, unheated environments, using air-filled piping to prevent freezing, and triggers water flow via pressure loss to suppress fires once activated.

Description

Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of sprinkler dry in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.

 

sprinkler dry

 

Fire sprinkler 51
 
 

sprinkler dry--How often to inspect dry pendent sprinkler heads?

dry sprinkler heads prevent pipe freezing in low-temperature environments through a core design feature: their piping networks are filled with compressed air or nitrogen instead of water, eliminating the risk of water freezing within the lines. Unlike wet sprinkler systems, which rely on pressurized water standing in pipes at all times-an arrangement that would freeze and burst pipes in subfreezing conditions-dry systems keep water confined to the main supply line.

This water supply is separated from the air-filled branch piping by a dry pipe valve, which remains closed under normal operating conditions. This ensures no water enters the air-filled pipes until a sprinkler head activates, so there is no liquid present to freeze in cold ambient temperatures.

When heat triggers a sprinkler head, the glass bulb shatters, releasing the compressed air and causing a pressure drop in the pipe. This pressure drop signals the dry pipe valve to open, allowing water to flow into the piping and discharge through the activated head. By keeping water out of the branch piping until a fire is detected, dry sprinkler heads eliminate ice formation, making them ideal for cold storage facilities, unheated warehouses, and outdoor installations where temperatures regularly drop below freezing.

 

 

sprinkler dry--What are the common troubleshooting methods for a malfunctioning sprinkler dry type system?

Daily Maintenance Checks for Concealed Pendant Sprinkler Heads (Concealed State)

 

Air Pressure Leakage Troubleshooting

For a sprinkler dry type system with abnormal pressure drops, start by using a precision pressure gauge to monitor the system pressure over 24 hours. Identify potential leakage points, including pipe joints, valve connections, and sprinkler head seals, by applying soapy water and checking for bubble formation. Tighten loose fittings or replace damaged gaskets promptly. After repairs, refill the system with compressed air or nitrogen to the recommended pressure level and conduct a secondary pressure test to confirm no further leaks. This step ensures the system maintains the air-water separation required for low-temperature operation.

01

Dry Pipe Valve Malfunction Fixing

When the dry pipe valve fails to open or close properly in a sprinkler dry type system, first shut off the main water and air supply for safety. Disassemble the valve cover carefully and inspect the valve seat for debris, rust, or worn seals that may cause misalignment. Clean the internal components with a mild detergent and dry them thoroughly. Test the valve's reset function manually to verify smooth operation. Check the associated solenoid valve and pressure sensors for electrical faults, and replace faulty parts if needed. Reassemble the valve and perform a full system test to ensure it triggers water flow only when pressure drops.

 

02

Sprinkler Head Activation Failure Resolution

If sprinkler dry type heads fail to activate during a fire simulation, first inspect the heat-sensitive glass bulbs for cracks, discoloration, or signs of damage-damaged bulbs may lose pressure and fail to shatter. Verify that the heads are installed at the correct height and orientation, as improper positioning can affect heat absorption. Check for pipe blockages that prevent water flow by disconnecting the head and blowing compressed air through the piping. Replace any non-functional heads with new ones that match the system's temperature rating and pressure requirements, and conduct an activation test post-replacement.
 

03

System False Discharge Troubleshooting

For false discharge issues in a sprinkler dry type system, begin by ruling out accidental pressure surges-install a pressure relief valve if surges are frequent. Inspect the dry pipe valve's quick-opening device for malfunctions, as a stuck device can cause unintended valve opening. Check the sprinkler heads for unauthorized modifications or damage that may trigger premature activation. Review the system's electrical controls, including fire alarm links, to eliminate signal interference or faulty sensor inputs. After troubleshooting, reset the system and run a simulated alarm test to confirm stable performance without false triggers.

04

sprinkler dry type-Technical Parameter

 

Specification
Details
K Factor
K=5.6(K80) / K=8.0(K115)
Thread Size
R21/2"-1/2"NPT / R23/4"-3/4"NPT 
Type Pendent
Temperature sensing element Glass bulb--Q3 or Q5
Frame Finish
Chrome Plated,Brass
Deflector Finish
Chrome Plated,Stainless steel
Certificate  ISO 
Fire sprinkler 55
Fire sprinkler 52
Fire sprinkler 54

  OUR CERTIFICATE:

ISO 9001
ISO 9001
ISO 14001
ISO 14001
ISO 45001
ISO 45001

 

How To Cooperate With Us?

Our address

NO.8, YUANFENG ROAD, MEIYUAN VILLAGE, KANGMEI TOWN, NANAN CITY, QUANZHOU CITY, FUJIAN CHINA

Phone Number

+86 15960762930

E-mail

alison@ca-fire.com

product-943-596

 

Learn More

 

 

 

 

 

Hot Tags: sprinkler dry, China sprinkler dry manufacturers, suppliers, factory

You Might Also Like

Shopping Bags