Brass Concealed Sprinkler
The outer decoration cover of the brass concealed sprinkler can be adjusted, and can be installed in the suspended ceiling as a whole, which is integrated with the suspended ceiling. The appearance is beautiful and generous, mainly used in places with luxurious decoration and high appearance requirements, such as hotels, restaurants and bars and other public activity places.
Description
Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of brass concealed sprinkler in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.
Brass Concealed Sprinkler
The outer decoration cover of the brass concealed sprinkler can be adjusted, and can be installed in the suspended ceiling as a whole, which is integrated with the suspended ceiling. The appearance is beautiful and generous, mainly used in places with luxurious decoration and high appearance requirements, such as hotels, restaurants and bars and other public activity places.
Installation method of brass concealed sprinkler
1, must be pendulous installation, can adjust the inner cover to adapt to the height of the ceiling changes.
2, the nozzle screw into the outer cover, and then screw into the installation pipe, and use a special wrench into the outer cover to tighten the nozzle on the pipeline.
3, pay attention not to touch the nozzle glass ball and backsplash tray when tightening; Can not twist the support arm of the nozzle, otherwise it will make the nozzle deformation and leakage.
4. Finally, screw the inner cover into the outer cover (special attention should be paid to: because the inner cover and the bottom cover are welded with low-temperature fusible alloy, the welding strength of low-temperature fusible alloy is low, so special care should be taken when screwing in, not to exert too much force on the bottom cover, and several points on the inner cover should be slowly screwed into the outer cover.
5.The special wrench produced by the factory should be used when installing. If the nozzle cannot be sealed after installation, it must not be installed with an extended sleeve on the wrench. Check whether the pipe fittings are qualified. If the pipe fittings are not qualified, replace or repair the pipe threads before installing. Forced installation may cause damage to the nozzle.
Hot Tags: brass concealed sprinkler, China brass concealed sprinkler manufacturers, suppliers, factory
Send Inquiry
You Might Also Like
