ZDMS Series Intelligent Fire Monitor
The ZDMS Series Intelligent Fire Monitor is an automatic tracking and positioning water cannon designed for large-space fire protection. Integrating infrared detection with motorized 360° horizontal and -90°~+30° vertical rotation, it locates and suppresses fires within 30–60 seconds — no human intervention required. Available in six models from 5 to 50 L/s, it suits warehouses, industrial plants, airports, and public venues with installation heights up to 35 meters.
Description
Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of zdms series intelligent fire monitor in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.
Automatic Fire Suppression
ZDMS Series Intelligent Fire Monitor
The Automatic Fire Tracking and Positioning Intelligent Fire Monitor is an advanced fire suppression system designed to automatically detect, locate, track, and extinguish fires at an early stage. Equipped with intelligent infrared and image sensing technology, the monitor continuously scans the protected area, identifies fire sources, and automatically directs the water jet toward the target for rapid fire suppression.
The system provides 24-hour automatic monitoring and can operate without human intervention, significantly improving fire protection efficiency while reducing response time and property loss. It is widely used in large open spaces where traditional sprinkler systems may be insufficient.
Select model
ZDMS0.6/5S
5 L/s
0.6 MPa · 5–20 m
ZDMS0.6/10S
10 L/s
0.6 MPa · 6–25 m
ZDMS0.8/20S
20 L/s
0.8 MPa · 8–35 m
ZDMS0.8/30S
30 L/s
0.8 MPa · 8–35 m
ZDMS0.8/40S
40 L/s
0.8 MPa · 8–35 m
ZDMS0.8/50S
50 L/s
0.8 MPa · 8–35 m
Full specifications
| Parameter | Specification |
|---|---|
| Flow Rate | 5 L/s (±8%) |
| Working Pressure | 0.6 MPa |
| Working Voltage | DC 12–24V |
| Standby Power Consumption | 1 W |
| Installation Height | 6–20 m |
| Horizontal Rotation Angle | 360° |
| Vertical Rotation Angle | -90° to +30° |
| Operating Temperature | -10°C to +50°C |
| Relative Humidity | ≤95% RH |
| Turning Radius | 350 mm |
| Connection | G1 1/4" Female Thread |
| Installation Method | Vertical Downward Mounting |
Key features
Auto fire detection
Infrared imaging locates fire source automatically - no manual targeting required.
Full 360° coverage
Unlimited horizontal sweep with -90° to +30° vertical tilt for complete spatial coverage.
Rapid positioning
Locks onto fire source in ≤30 s (small models) or ≤60 s (large models) after detection.
Low standby draw
1 W standby power loss across all models. DC12–24V or DC24V operation.
Application scenarios
Warehouses & logistics
High-bay racking storage, cold chain facilities, and distribution centers with large open floor areas.
Industrial plants
Chemical, petrochemical, and manufacturing facilities with combustible material and limited personnel access.
Underground parking
Multi-level parking structures where smoke accumulation and confined geometry increase response risk.
Airports & hangars
Aircraft maintenance bays, terminal atriums, and cargo handling areas with high ceilings.
Public venues
Exhibition halls, sports arenas, convention centers, and large atrium buildings.
Power & utilities
Transformer substations, cable tunnels, and power generation facilities with high-value equipment.
How it works
01
Fire detected
Infrared sensor
02
Signal processed
On-board controller
03
Cannon rotates
360° × ±90° aim
04
Water discharged
≤30 / 60 s lock
05
Fire out / reset
Auto-return to patrol
Installation requirements
Mechanical
| Item | Specification |
|---|---|
| Mount Orientation | Vertical downward lifting |
| Turning Radius (Small) | 350 mm |
| Turning Radius (Large) | 700 mm |
| Connection (Small) | G1 1/4" Female Thread |
| Connection (Large) | DN80 / DN100 Flange |
Electrical
| Item | Specification |
|---|---|
| Voltage (ZDMS0.6) | DC 12–24 V |
| Voltage (ZDMS0.8) | DC 24 V |
| Standby Power | 1 W |
| Control Interface | Compatible with Fire Alarm Panel |
| Cable Entry | Waterproof Conduit Fitting |
Installation Notes
Ensure the ceiling or supporting structure can bear a minimum of 3× the unit weight.
Maintain clear space equal to the turning radius on all sides.
Installation height must fall within the specified range for each model.
Products Description
| Model | Flow Rate (L/s) | Working Pressure (MPa) | Jet Radius (m) | Protection Radius (m) | Installation Height (m) | Operating Voltage |
|---|---|---|---|---|---|---|
| ZDMS0.6/5S | 5 | 0.6 | 34 | 40 | 6–20 | DC 12–24V |
| ZDMS0.6/10S | 10 | 0.6 | 39 | 40 | 6–25 | DC 12–24V |
| ZDMS0.8/20S | 20 | 0.8 | 56 | 65 | 8–35 | DC 24V |
| ZDMS0.8/30S | 30 | 0.8 | 62 | 65 | 8–35 | DC 24V |
| ZDMS0.8/40S | 40 | 0.8 | 67 | 70 | 8–35 | DC 24V |
| ZDMS0.8/50S | 50 | 0.8 | 73 | 70 | 8–35 | DC 24V |
Frequently asked questions
Q: Can the monitor detect fire automatically?
A: Yes. The ZDMS series features built-in infrared fire detection and can automatically locate and suppress a fire without external detectors.
Q: What is the difference between the 0.6 MPa and 0.8 MPa series?
A: The 0.6 MPa series is suitable for smaller spaces and lower installation heights, while the 0.8 MPa series is designed for larger areas with higher flow rates and longer protection distances.
Q: What power supply is required?
A: The 0.6 MPa models use DC 12–24V, while the 0.8 MPa models require DC 24V.
Q: Can it be connected to a fire alarm system?
A: Yes. The monitor can be integrated with fire alarm control panels for centralized monitoring and control.
Q: Is it suitable for harsh environments?
A: Yes. The unit operates from -10°C to +50°C with IP54 protection and supports use in humid environments.
Our address
NO.8, YUANFENG ROAD, MEIYUAN VILLAGE, KANGMEI TOWN, NANAN CITY, QUANZHOU CITY, FUJIAN CHINA
+86 18160950625
miki@ca-fire.com
Hot Tags: zdms series intelligent fire monitor, China zdms series intelligent fire monitor manufacturers, suppliers, factory
Send Inquiry
You Might Also Like
