Electric Remote-Controlled Fire Monitor

Name: China Electric Remote-Controlled Fire Monitor Manufacturers Suppliers Factory - CA-Fire Protection
Brand: CA-FIRE
SKU: 292693860

The PSKD series electric remote-controlled fire monitor is an advanced suppression system engineered for high-risk scenarios where on-site manual operation is dangerous or inefficient. Unlike traditional manual monitors, this unit integrates a DC24V electric actuator, wireless remote control (150m line-of-sight range), and local backup controls—letting trained personnel target fires from safe distances while maintaining precise jet alignment.

Send Inquiry Chat Now

Description

Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of electric remote-controlled fire monitor in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.

CA-FIRE Electric Remote-Controlled Fire Monitor

The PSKD series electric remote-controlled fire monitor is an advanced suppression system engineered for high-risk scenarios where on-site manual operation is dangerous or inefficient. Unlike traditional manual monitors, this unit integrates a DC24V electric actuator, wireless remote control (150m line-of-sight range), and local backup controls-letting trained personnel target fires from safe distances while maintaining precise jet alignment.

Constructed from corrosion-resistant stainless steel, the PSKD series delivers high-flow water jets (20L/s to 100L/s) across 50–90m ranges. Its dual-control design (remote + local manual) ensures reliability even if one pathway fails, making it a cornerstone of passive fire protection for hazardous industrial and commercial spaces.

DC24V Electric Actuator: A low-power motor (50W–300W, model-dependent) that drives 360° continuous horizontal rotation and -60°/+70° vertical pitch. It features IP65 waterproofing to resist damp, dusty fire environments.
Wireless Remote Controller: A handheld, battery-powered unit (150m range) with dedicated buttons for rotation, pitch, and flow adjustment. It pairs via secure RF signals (no re-pairing needed after initial setup).
Local Control Backup: A built-in manual flow valve (silver knob) and optional wall-mounted joystick panel-for use if the remote fails (e.g., dead battery).
Stainless Steel Body: Red-painted, corrosion-resistant housing with a pressure gauge (0–2.5MPa range) to verify water supply pressure before activation.
DN100 Flange Base: A 4-inch (customizable) stainless steel flange that secures the unit to structural supports (e.g., steel beams) with M12 bolts.

Technical Specifications (With Operational Context)

Parameter	PSKD8/20W	PSKD8/30W	PSKD8/40W	PSKD10/50W	PSKD10/60W	PSKD10/80W	PSKD12/100W	Operational Context
Flow Rate (L/S)	20	30	40	50	60	80	100	20L/s = small Class A fires; 100L/s = large Class B liquid tank spills
Rated Working Pressure (MPa)	0.8	0.8	0.8	1.0	1.0	1.0	1.2	0.8MPa = standard fire pump pressure; 1.2MPa enables 90m long-range jetting
Working Pressure Range (MPa)	0.5–1.6	0.5–1.6	0.5–1.6	0.5–1.6	0.5–1.6	0.5–1.6	0.5–1.6	<0.5MPa reduces range; >1.6MPa risks actuator damage
Range (m)	50	60	65	70	75	85	90	90m covers 180m-diameter spaces (ideal for airport hangars)
Motor Power (W)	50	50	120	120	120	120	300	300W supports 100L/s units (no rotation lag under high flow)
Supply Voltage (V)	DC24V (all)	DC24V (all)	DC24V (all)	DC24V (all)	DC24V (all)	DC24V (all)	DC24V (all)	Low-voltage DC24V minimizes electrical hazard in damp environments
Horizontal Rotation (°)	360 (continuous)	360 (continuous)	360 (continuous)	360 (continuous)	360 (continuous)	360 (continuous)	360 (continuous)	Unobstructed coverage for circular tank farms
Vertical Rotation (°)	-60–+70 (all)	-60–+70 (all)	-60–+70 (all)	-60–+70 (all)	-60–+70 (all)	-60–+70 (all)	-60–+70 (all)	Covers ground spills (-60°) and 12m-high equipment fires (+70°)
Remote Distance (m)	150 (all)	150 (all)	150 (all)	150 (all)	150 (all)	150 (all)	150 (all)	150m keeps operators outside flashover hazard zones (NFPA-defined >60°C areas)
Material	Stainless Steel (all)	Stainless Steel (all)	Stainless Steel (all)	Stainless Steel (all)	Stainless Steel (all)	Stainless Steel (all)	Stainless Steel (all)	Resists chemical/corrosive splash damage (critical for chemical plants)
Installation Mode	Seating Arrangement (all)	Seating Arrangement (all)	Seating Arrangement (all)	Seating Arrangement (all)	Seating Arrangement (all)	Seating Arrangement (all)	Seating Arrangement (all)	Mount at 3–4m height to maximize coverage
Service Environment	-10°C–+50°C (all)	-10°C–+50°C (all)	-10°C–+50°C (all)	-10°C–+50°C (all)	-10°C–+50°C (all)	-10°C–+50°C (all)	-10°C–+50°C (all)	Antifreeze required below -10°C

1. Avoiding Hazard Zones

Flammable liquid fires produce toxic fumes (e.g., benzene vapor) and flashover (1000°C+ temperature spikes). The PSKD's 150m range lets operators work outside the "immediate danger zone" (NFPA definition: <10m from flames), eliminating burn/fume exposure.

2. Faster Response in Large Spaces

In 10,000m² warehouses, manual monitors require 2–3 minutes to position. The PSKD's remote control cuts activation time to <30 seconds-reducing fire growth by 40% (per NFPA fire spread data).

3. Redundant Control Reliability

If the remote fails (e.g., radio interference), the local manual valve/joystick provides a backup-ensuring the unit can still suppress fires (at reduced safety) if needed.

Application & Operational Procedures

Application Scenarios (High-Risk Environments)

The PSKD series excels in spaces where on-site operation is unsafe:

Chemical Plants: Mounted near reactors to suppress corrosive liquid leaks (remote control avoids chemical exposure).

Oil Tank Farms: Deployed along dikes to target top-of-tank fires (90m range covers 180m-diameter tanks).

Airport Hangars: Installed at 4m height to suppress jet fuel spills (100L/s flow handles 50m² blazes).

Underground Tunnels: Positioned every 50m to address vehicle fires (remote works via tunnel radio repeaters).

Operational Procedures

Remote Wireless Operation (Primary Mode)

Power Check: Confirm the unit has DC24V power (green status light = active).

Remote Pairing: Press the remote's "Power" button (blue LED = connected).

Aim: Use "Left/Right/Up/Down" buttons to target the fire root (not flame tops-root targeting is 2x more efficient).

Activate Flow: Start the fire pump (verify gauge = 0.8–1.2MPa), then press "Flow On" on the remote.

Adjust: Use the "Flow Knob" to match flow to fire size (e.g., 20L/s for small Class A fires).

Shut Down: Press "Flow Off", power off the remote/pump, and return the unit to neutral.

Local Manual Operation (Backup)

Only use if the remote fails (and the area is safe-wear PPE):

Open the local flow valve (silver knob, 90° turn).

Use the local joystick (if installed) to adjust rotation/pitch.

Q1: What environments are this fire monitor suitable for?
A1: It is ideal for high-risk areas such as oil and chemical plants, storage tank areas, airports, warehouses, and port facilities.

Q2: How do I switch between spray and straight stream modes?
A2: From the operator's position, rotate the nozzle handwheel clockwise for straight stream and counterclockwise for spray mode.

Q3: What safety precautions should I follow during operation?
A3: Always secure the base, hold the handle or handwheel firmly, and ensure correct alignment. Keep a safe distance and follow standard firefighting procedures.

Q4: Can the monitor rotate and tilt?
A4: Yes, it supports horizontal rotation of at least 180° and vertical tilt from -15° to +60°, allowing precise aiming and maximum coverage.

Q5: What are the recommended pressures and flow rates?
A5: Depending on the model, flow rates range from 30 to 80 L/s, with rated working pressures from 0.8 to 1.0 MPa and maximum pressure up to 1.6 MPa.