Ductile Iron Gate Valve Rising Stem
The Ductile Iron Gate Valve Rising Stem is a third-generation ductile iron soft-sealed fire-specific valve, fabricated from QT450-12 high-toughness ductile iron (graphite spheroidization rate ≥90%). It integrates "3D flow channel optimization + adaptive soft-sealing" technology, breaking through the pain points of traditional gate valves such as "fast sealing failure and weak water hammer resistance". It is suitable for urban underground fire water networks, super high-rise building fire systems, chemical park explosion-proof fire protection and other scenarios. With a nominal pressure of 16bar and a wide temperature range adaptability of -30℃~+90℃, it can meet fire emergency needs in extreme environments.
Description
Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of ductile iron gate valve rising stem in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.
Products Description

CA-FIRE Ductile Iron Gate Valve Rising Stem
The Ductile Iron Gate Valve Rising Stem is a third-generation ductile iron soft-sealed fire-specific valve, fabricated from QT450-12 high-toughness ductile iron (graphite spheroidization rate ≥90%). It integrates "3D flow channel optimization + adaptive soft-sealing" technology, breaking through the pain points of traditional gate valves such as "fast sealing failure and weak water hammer resistance". It is suitable for urban underground fire water networks, super high-rise building fire systems, chemical park explosion-proof fire protection and other scenarios. With a nominal pressure of 16bar and a wide temperature range adaptability of -30℃~+90℃, it can meet fire emergency needs in extreme environments.
| Performance Dimension | DN50 | DN100 | DN200 | DN300 |
|---|---|---|---|---|
| Body Material | Ductile Iron QT450-12 | Ductile Iron QT450-12 | Ductile Iron QT450-12 | Ductile Iron QT450-12 |
| Stem Material | 2Cr13 Stainless Steel (Chrome-Plated) | 2Cr13 Stainless Steel (Chrome-Plated) | 3Cr13 Stainless Steel (Nitrided) | 3Cr13 Stainless Steel (Nitrided) |
| Sealing Structure | Three-Layer NBR Composite Seal | Three-Layer NBR Composite Seal | Four-Layer FKM Temperature-Resistant Seal | Four-Layer FKM Temperature-Resistant Seal |
| Nominal Pressure (PN) | PN16 (1.6MPa) | PN16 (1.6MPa) | PN16 (1.6MPa) | PN16 (1.6MPa) |
| Burst Pressure | ≥48MPa | ≥48MPa | ≥48MPa | ≥48MPa |
| Operating Torque (Full Pressure) | ≤80N·m | ≤120N·m | ≤200N·m | ≤300N·m |
| Flow Coefficient (Kv) | 50 | 160 | 630 | 1250 |
| Connection Standard | GB/T 9113 (Compatible with ANSI Class150) | GB/T 9113 (Compatible with ANSI Class150) | GB/T 9113 (Compatible with ANSI Class150) | GB/T 9113 (Compatible with ANSI Class150) |
Structural Innovation and Material Breakthroughs
1 Revolution in Ductile Iron Technology
Adopting isothermal quenching + graphite spheroidization dual process, the matrix of the Ductile Iron Gate Valve Rising Stem body has a pearlite content ≥95%, the tensile strength is increased to 500MPa, and the impact toughness (-20℃) reaches 12J/cm², so there is no risk of cracks in the valve body under fire water hammer impact. The surface adopts "zinc-aluminum coating + epoxy powder" dual anti-corrosion, and the salt spray test life exceeds 8000 hours, and it can be directly buried for 15 years without rust.
2 Sealing System Upgrade
Adaptive Sealing Design: The rubber sealing surface of the Ductile Iron Gate Valve Rising Stem disc adopts a "wedge compensation structure", which can automatically compensate for machining errors of the valve body and long-term wear. The sealing specific pressure is always maintained in the range of 0.8-1.2MPa;
Multi-Medium Compatibility: NBR seal is suitable for conventional fire water, and FKM seal is compatible with special media such as foam fire extinguishing agent and seawater (such as offshore platform fire protection).
3 Intelligent Operation and Maintenance Design
The valve body reserves a pressure sensor interface (M20×1.5), which can be connected to the fire Internet of Things system to monitor the pressure behind the valve in real time; the handwheel is equipped with a torque feedback dial, so that the operator can intuitively judge the opening and closing status and sealing performance of the valve.

Scenario-Based Application and Compliance Matrix

1 Typical Scenario Adaptation
Super High-Rise Fire Riser: The DN100 specification is suitable for buildings above 100 meters. The 16bar pressure can meet the 0.1MPa static pressure requirement of the top fire hydrant, and the ductile iron material's vibration resistance can resist low-frequency vibration in the elevator shaft;
Chemical Park Explosion-Proof Area: The DN200 specification adopts FKM seal and can transport foam mixture (ratio 3%-6%). The valve body's electrostatic grounding design (resistance ≤10Ω) complies with GB 50058 explosion-proof specification;
Coastal Port Fire Protection: The DN300 specification has been specially treated for marine salt spray and can be directly installed in the dock fire pump station, with a seawater corrosion resistance life of ≥10 years.
2 International Compliance Certifications
Domestic: GB 5135.6-2019 "Automatic Sprinkler System - Part 6: General Valves", CCCF Fire Product Certification;
International: UL 262 (US Fire Valve Certification), FM 1180 (Fire Equipment Performance Certification), CE (EN 10226-2 Ductile Iron Material Certification).
Our Advantages
Reliable Performance: Made from high-quality materials such as carbon steel or stainless steel, ensuring long-term durability and corrosion resistance under high-pressure conditions.
Clear Position Indication: The rising stem design provides a visible indication of the valve's open or closed status, reducing operational errors.
Remote Monitoring Capability: Integrated signal device allows real-time status transmission to control panels or automation systems, enhancing safety and operational efficiency.
Versatile Applications: Suitable for fire protection, water supply, HVAC, and industrial piping systems.
Easy Maintenance & Installation: Flanged connections simplify installation and maintenance, minimizing downtime.
Safety & Compliance: Designed to meet international standards and regulatory requirements, ensuring secure and compliant operation.
FAQ
Q: What is the purpose of the signal device on the valve?
A: The signal device transmits the valve's open or closed status to a remote control panel or automation system, allowing real-time monitoring and improving safety.
Q: Why is a rising stem used in this gate valve?
A: The rising stem provides a clear visual indication of the valve position, making it easy for operators to know whether the valve is open or closed.
Q: What materials are used for this valve?
A: The valve body is typically made from carbon steel, stainless steel, or ductile iron, while the internal components are designed for durability and corrosion resistance.
Q: Can this valve be used in fire protection systems?
A: Yes, it is suitable for fire protection, water supply, HVAC, and other industrial piping systems where reliable flow control and monitoring are essential.
Q: How should I maintain this valve?
A: Regularly inspect the rising stem and signal device for smooth operation, lubricate moving parts as recommended, and verify the electrical connections of the signal device.
Our address
NO.8, YUANFENG ROAD, MEIYUAN VILLAGE, KANGMEI TOWN, NANAN CITY, QUANZHOU CITY, FUJIAN CHINA
+86 15880910562
sales7@ca-fire.com

Hot Tags: ductile iron gate valve rising stem, China ductile iron gate valve rising stem manufacturers, suppliers, factory, OS Y Gate Valve
Send Inquiry
You Might Also Like












