Cast Iron Deluge Valve

Cast Iron Deluge Valve

Fire Fighting Deluge Valve:
1. Deluge Valve,External Resetting Diaphragm Style - 2"thru 12".
2. Deluge Valves are diaphragm type valves designed for vertical installation for fire protection system service.
3. Deluge Valves are used as "automatic water control valves" in deluge, preaction, and special types of fire protection systems such as foam-water systems.
4. Durable construction: Fire deluge valves are made from high-quality materials that are resistant to corrosion and other environmental factors. This makes them an ideal choice for use in harsh conditions.
5. Cost-effective: Compared to other fire suppression systems, fire deluge valves are relatively inexpensive to install and maintain. This makes them a cost-effective solution for many businesses that need to protect their premises from fire.

Description

Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of cast iron deluge valve in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.

 

Deluge valve group should be have the function

 

1) There are two operation modes: automatic control and manual control. 2) Can monitor water supply and outlet pressure.

3) The water supply of the system can be switched on or off.

4) Can accept electric signals to open the rain valve, can accept the transmission pipe signal hydraulic or pneumatic open the rain valve.

5) Can drive the hydraulic alarm bell alarm.

6) Can show the rain valve opening and closing state.

 

Deluge valve setting requirements

 

1) The rain valve group should be located in the room where the ambient temperature is not lower than 4 ° C and there are drainage facilities, and its location should be close to the protected object and easy to operate.

2) When the rain shower valve group is located outdoors, the accessories of the rain shower valve group should have anti-corrosion function; The accessories of the rain shower valve group located in the explosion-proof area shall meet the explosion-proof requirements.

3) The rain valve group in cold areas should be insulated by electric heat tracing or steam heat tracing.

4) For the rain valve group set in parallel, a check valve should be set at the entrance of the rain valve.

5) The pipeline in front of the rain valve should be equipped with a flushable filter.

6) The test port of the rain shower valve should be connected to reliable drainage facilities.

product-1050-393

 

Main Material Ductile iron
The Working Pressure 1.6Mpa
Testing for Seal 3.2Mpa
Testing For Stress 6.4Mpa
Frictional Resistance <0.02Mpa
Applicable Temperature 4°C to 70°C
Connection Flange × Flange
Available Size DN50 thru DN350 (2” thru 14”)
Installation Vertically
Flow Switch Contact Capacity DC24V,0.5A

 

Contact Us
 
about1 1
about1 2
about1 3
about1 4
about1 5
about1 6

 

 

Hot Tags: cast iron deluge valve, China cast iron deluge valve manufacturers, suppliers, factory, Deluge Valve Alarm Check Valve, Deluge Valves, Automatic Deluge Valve Sprinkler System

You Might Also Like

Shopping Bags