Gost Type Fire Hydrants

Name: China Gost Type Fire Hydrants Manufacturers Suppliers Factory - CA-Fire Protection
Brand: CA-FIRE
SKU: 287156396

Gost-type fire hydrants (complying with Russian GOST standards) are municipal fire fixtures. They connect to hoses, supply high-pressure water for firefighters to extinguish blazes, curb fire spread, and safeguard lives and properties as a key emergency fire system component.

Send Inquiry Chat Now

Description

Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of gost type fire hydrants in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.

Gost type fire hydrants-What specific GOST standards regulate these fire hydrants?

Gost type fire hydrants--GOST type

GOST-type fire hydrants are governed by Russia's national GOST standards, with key regulations including:

GOST R 50574-93: Defines technical specifications for above-ground fire hydrants, covering structural design, working pressure (typically 1.6 MPa), corrosion-resistant material requirements (suited to Russia's cold climates), and performance testing protocols.

GOST 12.4.009-83: Sets safety standards for fire hydrant markings, protective components, and operational safeguards to prevent misuse or injury.

GOST 28235-89: Standardizes hydrant outlet interfaces, ensuring compatibility with GOST-compliant fire hoses and fittings.

These standards ensure GOST hydrants meet Russia's fire safety regulations, delivering reliable performance in cold, harsh environments.

Gost type fire hydrants---How to safely operate a GOST-type fire hydrant?

Operating a GOST-type fire hydrant safely (aligned with GOST R 50574-93) requires trained personnel:First, clear the area of obstructions and remove its frost-resistant protective cap, inspecting outlets for damage. Use a GOST-specified wrench to gradually open the control valve-avoid sudden full opening to prevent water hammer (a key risk in Russia's cold climates).

Next, secure a GOST-compliant fire hose to the outlet for a tight seal. Fully open the valve to reach its standard 1.6 MPa working pressure, verifying steady flow.

Post-use, close the valve slowly, drain residual water (critical to stop freezing), and reattach the cap. Unauthorized operation risks equipment damage or injury, so only trained staff should handle these hydrants.

Gost type fire hydrants

What cold-weather maintenance steps suit GOST fire hydrants?

More details

Pre-Winter Drainage & Residual Water Removal

Critical for GOST fire hydrants (per GOST R 50574-93), this step involves fully draining residual water after every use-cold Russian winters risk freezing, which can crack the ductile iron body. Inspect the hydrant's built-in drainage valve to ensure unobstructed flow; clear any debris that might block water evacuation. For long idle periods, confirm no stagnant water remains, as ice expansion could damage internal components.

Frost-Resistant Component Check

Target components vulnerable to low temperatures: inspect rubber seals (prone to brittleness in cold) and replace aged ones per GOST 12.4.009-83. Verify the integrity of the frost-proof protective cap-ensure it seals tightly to block snow/ice intrusion. Check anti-corrosive coatings (epoxy or cold-resistant paint) for chips; touch up damaged areas to prevent rusting, which worsens in freezing, moist conditions.

Monthly Winter Function Testing

Conduct brief, controlled tests (monthly) to avoid prolonged water exposure: open the valve partially to confirm steady flow (matching GOST's 1.6 MPa working pressure), then immediately drain all water. This validates operability without leaving residual liquid to freeze. Document pressure and drainage performance; address minor issues (e.g., slow flow) promptly to avoid emergency failures in subzero temperatures.