Home - Products - Fire Hydrant System - Fire Hydrants - Details

French-Style Above-Ground Fire Hydrant

Name: China French-Style Above-Ground Fire Hydrant Manufacturers Suppliers Factory - CA-Fire Protection
Brand: CA-FIRE
SKU: 293239577

This French-style above-ground fire hydrant is a compliance-certified core component of European (especially French) municipal/industrial fire protection systems, engineered to meet local fire safety norms and rapid-response demands. Its defining features include dual 2.5-inch Guillemin symmetric outlets (EN 14420-8 compliant) and a robust ductile iron structure—designed for open-area installation (roadside, industrial parks, commercial districts) to deliver high-flow water for initial fire suppression and fire truck water intake.

Send Inquiry Chat Now

Description

Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of french-style above-ground fire hydrant in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.

CA-FIRE French-Style Above-Ground Fire Hydrant

This French-style above-ground fire hydrant is a compliance-certified core component of European (especially French) municipal/industrial fire protection systems, engineered to meet local fire safety norms and rapid-response demands. Its defining features include dual 2.5-inch Guillemin symmetric outlets (EN 14420-8 compliant) and a robust ductile iron structure-designed for open-area installation (roadside, industrial parks, commercial districts) to deliver high-flow water for initial fire suppression and fire truck water intake.

Unlike generic hydrants, its quick-connect Guillemin interfaces cut hose connection time to <10 seconds (vs. 30+ seconds for threaded outlets), while the dual-outlet design supports simultaneous multi-directional fire fighting. The red epoxy-powder coating ensures high visibility (a global fire safety signage standard) and long-term resistance to outdoor corrosion/impact.

Every part of this hydrant is optimized for French fire-fighting scenarios:

QT450 Ductile Iron Body: Cast from QT450 ductile iron (high-impact-resistant, 2x stronger than cast iron) and coated with epoxy powder, it withstands vehicle collisions, rain/snow corrosion, and extreme temperatures-delivering a 15+ year service life under regular maintenance.

Dual Guillemin Outlets (2.5"): Aluminum-alloy EN 14420-8 compliant interfaces enable tool-free, one-handed connection. Their symmetric lug design locks into place with a 90° twist, ensuring leak-proof seals even under 16bar pressure.

Brass Valve Core & 2Cr13 Stainless Steel Stem: The brass core provides airtight sealing (no static water leakage), while the 2Cr13 stem ensures smooth valve operation-even after months of inactivity (a common pain point for low-quality hydrants).

DN100 Flanged Elbow Base: A black ductile iron 4-inch flanged elbow connects to municipal fire pipelines, supporting a maximum flow rate of 1800L/min (enough for two 900L/min fire hoses).

Chain-Attached Protective Caps: Metal caps (secured by stainless steel chains) prevent debris/insects from clogging outlets, ensuring readiness in emergencies.

5. Step-by-Step Operation Guide

Only trained personnel (certified firefighters, on-site emergency teams) should operate this hydrant:

5.1 Pre-Operation Checks

Verify no damage: Inspect outlets, valve stem, and flange for cracks/leaks.

Clear debris: Remove protective caps (store via chains) and ensure outlets are free of dirt.

Confirm pressure: (If gauged) Ensure static pipeline pressure is 8–16bar.

5.2 Connection & Activation

Connect Hose: Align the hose's Guillemin coupling with the hydrant outlet; push firmly and twist 90° clockwise until it clicks (locked).

Open Valve Slowly: Turn the top valve stem counterclockwise 1/4 turn to release air; fully open (2–3 turns) once water flows.

Adjust Flow: Use the valve stem to regulate flow (partial open for small fires, full open for large blazes).

5.3 Post-Operation Shutdown

Close Valve: Turn the stem clockwise until fully closed (do not over-tighten).

Disconnect Hose: Press the coupling's release tab and twist 90° counterclockwise to detach.

Drain Residual Water: Open the valve 1/8 turn to drain water (prevents freezing/corrosion).

Replace Caps: Clean outlets and reattach protective caps (secure chains).

6. Installation Requirements (French Compliance)

Concrete Base: Install on a 10cm-thick reinforced concrete base (level to avoid tilting).

Burial Depth: The DN100 elbow must be buried below France's local frost line (≥80cm in most regions).

Flange Sealing: Use a nitrile rubber gasket between the elbow and pipeline; tighten bolts evenly (45N·m torque).

Visibility: Mount a reflective "HYDRANT INCENDIE" sign 2m above the hydrant (required by French law).

Fire Protection Focus
CA-FIRE specializes in fire protection equipment, with a strong understanding of real-world firefighting requirements and system applications.

Reliable Manufacturing Capability
Products are manufactured using stable processes and quality materials to ensure consistent performance and long-term durability.

Application-Oriented Design
Equipment is designed based on practical installation and usage scenarios, improving safety, efficiency, and ease of maintenance.

Flexible Project Support
CA-FIRE supports customized configurations to meet different project requirements, including outlet options, materials, and performance needs.

Responsive Service & Support
Professional technical support and efficient communication help customers move projects forward smoothly.

How To Cooperate With Us?

Our address

NO.8, YUANFENG ROAD, MEIYUAN VILLAGE, KANGMEI TOWN, NANAN CITY, QUANZHOU CITY, FUJIAN CHINA

+86 15880910562

E-mail

sales7@ca-fire.com