Home - News - Details

Precautions For Pressure Relief Valves

When the upper limit of the safe pressure is reached, it can be automatically turned on to reduce the pressure to ensure safety. The most common is the pressure relief valve on the pressure cooker at home, which is a simple mechanical pressure relief, and the pressure relief valve of the heating and air conditioning system, which is a water floating pressure relief valve. It is a kind of valve that releases part of the pressure when the system pressure exceeds the design specification to make the system work normally.
1. The pressure relief valve can be installed horizontally or vertically, but the installation should pay attention to the direction of the inlet and outlet of the water flow of the valve body, and it cannot be mistaken. In general, a fire water supply system can be installed with only one pressure relief valve.
2. If the drain port of the pressure relief valve is far away and the drain pipe is too long (>20m), the diameter of the drain pipe should be enlarged one stop than the specification of the pressure relief valve to prevent the back pressure caused by poor discharge and ensure the stable pressure of the pipe network before the pressure relief valve.
3. During the pressure test process of the fire water supply system, if the system test pressure is higher than the nominal pressure of the selected pressure relief valve L, the shut-off valve of the pressure relief valve should be closed to avoid damage or failure of the pressure relief valve.
4. During the operation of the pressure relief valve, if there is a failure and the control fails, check whether the pipe is unblocked first. Then check whether the water filter on the Yan body control pipeline is blocked, whether the main valve and pilot valve membrane are ruptured, and whether the sealing gasket of the main valve and the guide thickness is damaged.

Send Inquiry

You Might Also Like