Home - Products - Fire Sprinklers - Details
K5.6/K8.0/K11.2 Brass Fire Sprinkler Head
video
K5.6/K8.0/K11.2 Brass Fire Sprinkler Head

K5.6/K8.0/K11.2 Brass Fire Sprinkler Head

These brass fire sprinklers (K5.6/K8.0/K11.2) have distinct flow rates (K-factors) for commercial/industrial areas. They activate on heat, spraying water to douse fires. Their brass build resists corrosion, enhancing system reliability.

Description

Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of k5.6/k8.0/k11.2 brass fire sprinkler head in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.

 

K5.6/K8.0/K11.2 Brass Fire Sprinkler Head: Can the operating temperature be customized?

 

Fire sprinkler 37
 
 

K5.6/K8.0/K11.2 Brass Fire Sprinkler Head

Our standard temperature options (68℃ for commercial spaces, 93℃ for industrial areas) are in stock for immediate delivery. For customization, we support common ranges: 57℃ (cold storage) up to 141℃ (high-heat environments). Note that customized orders require a minimum quantity (MOQ) - since we need to adjust the thermosensitive element and re-test to maintain UL/FM/CE compliance. This adds 3-5 business days to the lead time, but the sprinklers' brass material, flow rate (K-factor), and installation threads will remain consistent with standard models for seamless fitting.

 

 

 

K5.6/K8.0/K11.2 Brass Fire Sprinkler Head - Can the thermosensitive elements of these sprinklers be replaced on-site after activation, or do the entire units need to be discarded?

 

Regarding your question: After activation, the thermosensitive elements of these K5.6/K8.0/K11.2 brass sprinklers cannot be replaced on-site-entire units must be discarded and replaced.

The thermosensitive glass bulb (or link) is integrally built with the sprinkler's valve mechanism. Once activated (via heat-induced bulb breakage/link separation), the internal structure is permanently compromised. On-site element replacement can't restore certified performance, and it invalidates UL/FM/CE compliance (which applies only to factory-assembled units). For fire safety reliability, replace activated sprinklers fully with new, certified ones.

 
 

K5.6/K8.0/K11.2 Brass Fire Sprinkler Head--Are there any special requirements for the storage environment of the brass sprinkler head?

 

Temperature & Humidity Control

Store brass sprinkler heads in a controlled environment with a stable temperature of 15–25℃ and relative humidity (RH) ≤60%. Avoid extreme temperature fluctuations (e.g., below 0℃ or above 30℃) and high humidity, as these can cause brass oxidation, rust formation, or damage to the heat-sensitive glass bulb/link. For long-term storage (over 6 months), install temperature and humidity gauges to monitor conditions and adjust ventilation timely to maintain the optimal range, ensuring no moisture condensation on the sprinkler surfaces.

01

Clean & Well-Ventilated Space

Choose a dust-free, well-ventilated warehouse to prevent the accumulation of dust, dirt, or airborne contaminants on the sprinkler heads. Poor ventilation can lead to mold growth or chemical residue buildup, which may clog the sprinkler orifice or corrode the brass body over time. Keep the storage area clean by regular sweeping and filtering incoming air; avoid storing the sprinklers near construction zones or areas with heavy dust. Ensure adequate air circulation to reduce the risk of moisture retention and maintain air quality.

 

02

Original Packaging & Proper Stacking

Keep the sprinkler heads in their sealed factory original packaging at all times before installation-do not disassemble the packaging prematurely, as it provides a protective barrier against dust, moisture, and physical damage. Stack the packaged sprinklers on pallets with a maximum stacking height of 3 layers to avoid excessive pressure that could deform the brass structure or damage the thermosensitive elements. Use non-abrasive pallet liners to prevent scratches on the brass surface and ensure the packages are placed flat to avoid tilting or falling.
 

03

Away from Hazardous Substances & Heat Sources

Store the brass sprinklers far from direct sunlight, heat sources (e.g., heaters, boilers), and corrosive substances/gases (e.g., salt spray, acids, alkalis, industrial chemicals). Direct sunlight and high heat can accelerate the aging of plastic components and weaken the thermosensitive elements, while corrosive gases can cause irreversible brass corrosion and valve malfunction. Additionally, separate the sprinklers from flammable or explosive materials to eliminate fire risks, and maintain a minimum distance of 2 meters from any heat-emitting equipment.

04

K5.6/K8.0/K11.2 Brass Fire Sprinkler Head-Technical Parameter

 

Brass Fire Sprinkler Heads Specification
Brass Fire Sprinkler Heads Details
K Factor
K=5.6(K80) / K=8.0(K115) / K=11.2(K161)
Thread Size
R21/2"-1/2"NPT / R23/4"-3/4"NPT 
Type Upright/Pendent / sidewall
Temperature sensing element Glass bulb
Frame Finish
Chrome Plated,Brass
Deflector Finish
Chrome Plated,Copper
Certificate
CCCF  / ISO
Fire sprinkler 38
Fire sprinkler 37
Fire sprinkler 39

  OUR CERTIFICATE:

ISO 9001
ISO 9001
ISO 14001
ISO 14001
ISO 45001
ISO 45001

 

How To Cooperate With Us?

Our address

NO.8, YUANFENG ROAD, MEIYUAN VILLAGE, KANGMEI TOWN, NANAN CITY, QUANZHOU CITY, FUJIAN CHINA

Phone Number

+86 15960762930

E-mail

alison@ca-fire.com

product-943-596

 

Learn More

 

 

 

 

 

Hot Tags: k5.6/k8.0/k11.2 brass fire sprinkler head, China k5.6/k8.0/k11.2 brass fire sprinkler head manufacturers, suppliers, factory

You Might Also Like

Shopping Bags