Fire Water Gun Monitor
video
Fire Water Gun Monitor

Fire Water Gun Monitor

The Fire Water Gun Monitor is an automated fire-fighting device that uses water as the medium and achieves long-distance fire suppression or riot control through high-pressure spraying. It is widely applied in large-space venues and special fire scenarios.

Description

Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of fire water gun monitor in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.

 

Products Description

 

product-800-800
 
 

CA-FIRE Fire Water Gun Monitor

The Fire Water Gun Monitor is an automated fire-fighting device that uses water as the medium and achieves long-distance fire suppression or riot control through high-pressure spraying. It is widely applied in large-space venues and special fire scenarios.

 

 

 

Technical Parameter

 

Model PS8/20 PS8/30
Flow rate (L/s) 20 30
Rated working pressure(Mpa) 0.8 0.8
Working pressure range(Mpa) 0.8-1.6
Range (m) ≥50 ≥60
Angle of horizontal rotation(º) 360
Angle of vertical rotation(º) -60-+70
Material Aluminium Alloy
Installation mode Seating arrangement
Connecting flange DN100
Service Environment -10℃-+50℃

Common Problems and Solutions in the Installation of  Fire Water Gun Monitor Installation

Fire Water Gun Monitor Installation
Improper installation will directly result in "insufficient range, leakage, and inability to start", and such situations must be avoided.
product-800-800
The parameters of the pipeline and the water cannon do not match.
Too small pipe diameter → Pressure loss → Shortened range; Flange mismatch → Leakage → Insufficient water pressure
1. Before installation, check the design drawings: Ensure that the pipe diameter (such as DN100/DN150) and pressure grade are consistent with the water cannon;
2. Flange sealing: Use high-pressure resistant nitrile rubber sealing gaskets, and tighten the bolts diagonally (to avoid uneven force and leakage);
3. After installation, conduct a pressure test: Supply water at 0.8 times the working pressure and maintain the pressure for 30 minutes without leakage.
product-800-800
Installation position is inappropriate (blind area / obstruction)
The protection range is not fully covered, and it is unable to accurately target the fire source during a fire.
1. Calculate the distance based on "protection radius": The distance between automatic water cannons ≤ 2 × protection radius (for example, if the protection radius is 15m, the distance ≤ 30m);
2. Avoid obstacles: Stay away from beams, equipment, pipelines and other obstructions (the distance between the obstruction and the water cannon ≥ 1.5m);
3. Adjust installation height: Indoor water cannons are 3-5m from the ground, outdoor 5-8m (ensure there is no blind area for the spraying angle).
product-800-800
The support is not securely fixed.
When the water cannon is in motion during spraying, it causes the projectile to deviate and the support to break.
1. Select the appropriate support: Choose a support made of ≥Q235 steel based on the weight of the water cannon (e.g. 5-15kg), and the load capacity should be ≥ twice the weight of the water cannon;
2. Fixation method: Use M12 or larger expansion bolts to fix on concrete beams/walls (do not fix on lightweight partitions);
3. Acceptance test: After installation, manually shake the water cannon. If there is no obvious shaking, it is considered qualified.
product-800-800
The outdoor area in the north has not been treated for frost prevention.
Winter caused water to accumulate in the pipes and freeze, resulting in pipe cracking → The water cannon was scrapped.
1. Choose water cannons with "automatic drainage valve": They will automatically drain the accumulated water in the pipeline when not in use.
2. Additional insulation: Wrap the pipeline with a rock wool insulation layer (thickness ≥ 50mm), and add electric heating at the valve position (turn on the power in winter to prevent freezing).
3. Before winter shutdown: Manually drain the residual water in the pipeline (open the drainage valve).
 
FAQ

Q1: What types of sprinkler systems are compatible with this accelerator?

A:It works with dry pipe sprinkler systems of various sizes, making it suitable for commercial buildings, warehouses, and industrial facilities.

Q2: How does CA-FIRE ensure product quality and reliability?

A: CA-FIRE products are manufactured with high-quality materials, undergo strict quality control, and comply with international fire protection standards.

Q3: Can CA-FIRE provide technical support or installation guidance?

A: Yes, CA-FIRE offers professional technical support, installation guidance, and after-sales assistance to ensure optimal system performance.

How To Cooperate With Us?
 

Our address

NO.8, YUANFENG ROAD, MEIYUAN VILLAGE, KANGMEI TOWN, NANAN CITY, QUANZHOU CITY, FUJIAN CHINA

 
WhatsApp

+86 15880910562

 

E-mail

sales7@ca-fire.com

product-943-596

 

Learn More

 

 

 

 

 

Hot Tags: fire water gun monitor, China fire water gun monitor manufacturers, suppliers, factory, Handwheel Control Water Monitor, Handwheel Control Fire Water Monitor For Fire Fighting, Fixed Firefighting Water Monitor, Stainless Steel Lever Control Fire Water Monitor, Stainless Steel Water Fire Monitor With Handheel, Handwheel Control Water Foam Fire Monitor

You Might Also Like

Shopping Bags