Automatic Fire Fighting Monitor Water Cannon
1. The 10L/s automatic fire fighting monitor water cannon delivers powerful suppression, releasing 10 liters of water per second to quickly douse medium-sized fires, smothering flames and preventing spread in areas like warehouses or factories.
2. It autonomously detects and tracks fire sources via sensors, aiming precisely without manual operation, ensuring rapid response to contain blazes before they escalate, critical for reducing property damage.
3. Its consistent 10L/s flow balances force and coverage, effectively wetting surfaces to prevent re-ignition, while integrating with alarm systems for seamless activation in emergency scenarios.
Description
Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of automatic fire fighting monitor water cannon in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.
Products Description--automatic fire fighting monitor water cannon
Automatic Fire Fighting Monitor Water Cannon
How to install automatic fire fighting monitor water cannon?
Prior to installing the 10L/S automatic fire fighting monitor water cannon, thorough preparation is essential.
Begin by selecting an optimal mounting location: it should offer unobstructed coverage of the protected area, typically 5–8 meters above the ground for ceiling or wall mounting, ensuring the sensor array can detect fires within a 30-meter radius.
Check that the surface (concrete, steel, or solid masonry) can bear the cannon's weight (around 50–70kg) and has pre-installed reinforcement if needed. Gather necessary tools: a drill with masonry bits, level, wrench set, Teflon tape, and a torque wrench.
Inspect the cannon for shipping damage, verify all components (base plate, rotation motor, sensor unit, and water inlet flange) are included, and check that the inlet size (usually 2.5 inches) matches the water supply pipeline.
Flush the water supply line to remove debris, which could clog internal valves, and confirm water pressure (minimum 0.8MPa) meets the cannon's requirements.
The installation process starts with securing the base plate to the mounting surface using expansion bolts, ensuring it is level to prevent rotation issues.
Attach the cannon's main body to the base plate, tightening bolts to the manufacturer's specified torque (typically 35–40 N·m) to avoid vibration loosening.
Connect the water inlet flange to the supply pipeline using a flexible joint to accommodate minor alignment discrepancies, wrapping Teflon tape around threads to prevent leaks.
For electrical connections, route the power cable (220V AC or 24V DC, depending on the model) and control wires through a conduit to the control panel, ensuring proper grounding to avoid electrical interference with sensors.
Test the rotation mechanism manually to ensure smooth movement, then power on the system to calibrate the sensor: follow the manual to set detection sensitivity and establish the coverage zone via the control panel.
Finally, conduct a water flow test to check for leaks, verify pressure stability, and confirm the cannon responds correctly to simulated fire signals (using a test flame or infrared emitter).
AFDD Arc Fault Protection Circuit Breaker
Certification
CE
More detials
Flow rate: 10L/s
Rated pressure: 0.6MPa
Protection radius: 35m
Installation height: 6m-25m
Working voltage: DC24V
Vertical angle: -90°～+30°
Horizontal angle: ±180°
Ambient temperature: -10℃～+45℃
Connection method: DN32 flange (including mating flange, fasteners and seals)
Device includes: primary starter, detection locator, gun-mounted control center, decoder, HD video camera and other components 3.
FAQ
Q: What's the maximum distance this 10L/S monitor can cover?
A: It has a protection radius of 35m, ensuring coverage over large areas like warehouses or workshops when mounted at the recommended height (6m-25m).
Q: What power supply does the 10L/S automatic monitor require?
A: It operates on DC24V, which is safe for integration with most fire control systems and reduces electrical hazards in wet environments.
Q: Can it rotate freely to target fires from all angles?
A: Yes, it offers ±180° horizontal rotation and -90°～+30° vertical adjustment, allowing full coverage of the protected zone without blind spots.
Q: What's the required water pressure to operate effectively?
A: It needs a rated pressure of 0.6MPa. Ensure your water supply system meets this to maintain the 10L/s flow rate and optimal fire suppression performance.
Q: What components come with the monitor for installation?
A: It includes a primary starter, detection locator, gun-mounted control center, decoder, HD camera, and DN32 flanges with mating parts and seals.
Hot Tags: automatic fire fighting monitor water cannon, China automatic fire fighting monitor water cannon manufacturers, suppliers, factory
Send Inquiry
You Might Also Like
