65mm Fire Hydrant Valve
Indoor fire hydrant valve is indoor pipe network to the fire water supply, with a valve interface, for factories, warehouses, high-rise buildings, public buildings and ships and other indoor fixed fire fighting facilities, usually installed in the fire hydrant box, with fire hoses and water guns and other equipment supporting the use.
Indoor fire hydrant valve, is an important part of the fire water system, it is installed in the indoor fire box, general nominal diameter (mm): DN50, DN65 two kinds of nominal working pressure 1.6MPa, strength test pressure 2.4MPa.
Applicable medium: clear water, foam mixture.
Description
Ca-Fire Protection Co.,Ltd is one of the most credible manufacturers and suppliers of 65mm fire hydrant valve in China. Welcome to wholesale custom made fire equipment products at competitive price from our factory. Contact us for more cheap products.
How to installation?
1, in addition to the equipment layer without combustible materials, set the fire hydrant valve building, all levels should be set.
2, fire elevator room should be set in the front room fire hydrant.
3, fire hydrant valve should be set in the location of obvious and easy to make the replacement.
4, the port from the ground or for the height of the base surface should be 1.1m, the direction of its water should be down or set up with the fire hydrant wall into a 90 ° angle; the distance between the port and the edge of the fire hydrant box should not affect the connection of the fire hose.
5, fire hydrant valve spacing determined by calculation, high-rise plants (warehouses), elevated warehouses and A, B plant indoor fire hydrant spacing should not be greater than 30m, other single-story or multi-storey building indoor fire hydrant spacing should not be greater than 50m.
6, the same building should be used within the unified specifications of the fire hydrant valve, water and water belt. The length of each water belt should not be greater than 25m.
Physical Characteristics:
| Body: | ductile iron or brass |
| Wheel: | ductile iron or brass |
| Stem: | Brass |
| Flap: | Ductile iron w/NBR |
| Seat: | Brass |
| Coupling material: | Aluminum |
| BSPT size: | DN50(2 inch) or DN65 (2.5 inch) |
| Finishing: | Red painting, yellow, etc... |
| Working pressure: | 232psi( 16 bar / 1.6 MPa） |
| Packing: | Packed in carton or according to your requirement. |
| Coupling type: | Russian type; France type; British type could be choose. |
Our factory:
FAQ:
⑴Can you customize for clients?
Yes, we can customize as your need, we have R&D department, our designers can make design for you and our technicians make prototype.
⑵Can I mix different models in one container?
Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
⑶Is the sample provided for free?
A few small products like sprinkler heads can be provided for free, but the buyer needs to pay for the shipping. Other products need to be confirmed according to the specific situation.
⑷If l have a product wants to be made in other special material, can you do it?
Of course, you just need to provide us designed drawings or sample and R&D department will estimate that whether we can do or not, we will give you the most satisfactory reply.
⑸What about the loading port?
Usually we will export by Xiamen port, if you have shipping forwarder at other port, we also can be cooperate with them.
⑹Can l visit your factory?
By all means, we warmly welcome your arrival, Before you take off from your country, please let us know. We will show you the way and arrange time to pick you up if possible.
⑺Can I request to advance the shipment?
It should be depends on whether there is sufficient inventory in our warehouse.
⑻How to mail the samples?
Small samples are usually sent by express (DHL, UPS). If the buyer has other opinions, both parties can discuss with each other.
⑼Do you have technical support?
Yes, we have a professional engineering team.
⑽Why Choose Our Company?
Our company is the perfect choice for all your business needs. We have a team of experienced professionals who are dedicated to providing the highest level of service and quality products to our clients.
Our commitment to excellence is evident in everything we do, from our customer service to our innovative solutions.
We understand that your success is our success and that's why we work tirelessly to ensure that you achieve your goals.
Our years of experience in the industry, combined with our passion for what we do, makes us the ideal partner for your business.
Choose us and experience the difference that our exceptional service and expertise can make.
Hot Tags: 65mm fire hydrant valve, China 65mm fire hydrant valve manufacturers, suppliers, factory, CA Fire Indoor Fire Hydrant For Fire Fighting, CA FIRE Landing Valve Fire Hydrant, Indoor Type Landing Valve for Fire Hose Cabinet
Send Inquiry
You Might Also Like
